.

Flagship VBS of the new generation. New in the range of VBS-L and VBS-X

  • bezramnoye razdvizhnoye ostekleniye vizyon

Let us introduce the novelties not only in the Vizyon range, but also in the market of sliding frameless systems. 2 new modifications have appeared among balcony-type VBS systems, which are designed for terraces, balconies and interior glazing.

VBS-L is a frameless sliding glazing system for terraces without a threshold. Below there is a guiding profile with dimensions of 30 mm (height) x 37 mm (width) and a double-sided wing. Profile is recessed in the floor. For comparison, the lower guide profile in classical VBS version, along with the drip profile, had dimensions of 70 mm (height) x 45 mm (width). The lower guiding profile is installed with one parking roller instead of two classic rollers, while the second one replaced by a sliding carriage. In fact, now there is no need for the lower roller to leave room. Accordingly, there is no threshold to cross at the bottom when the system is completely open.

VBS-X is a frameless sliding system for terraces with low threshold. Its lower guide of 30 mm (height) x 40 mm (width) is not equipped with additional wings. It is designed for installation on terraces or on the plinth of balconies. The height of the guide ledge is 20 mm above the zero mark, which prevents accidental ingress of water and precipitation into the room. One roller is also replaced with a slide carriage, so the bottom rail is almost invisible in the open position.

More about the systems

Photo of the systems

Video of the systems

^ To top
Asking
price
Calculate the cost by size

Our customers are very busy people. We save your time, therefore we simplified the work scheme and made it as convenient as possible for you.

If you want to know the approximate cost for the size of your terrace, balcony, then immediately go to the Price list , the price is for the finished construction with the installation VBS VBS-X, L SCS-X SCS-L KCS-L KCS  how can the systems work in systems video review

If you are already ready to place an order, then you no longer need to wait for the measurer, while adjusting your plans, it is enough:

Send photos of the openings you want to glaze (terrace, barbecue area, interior partition, etc.) and approximate dimensions (error up to 1 cm is permissible) to us by email biuro@vizyon.company or by WhatsApp number +48573 580 838. Alternatively, you can send a freehand drawing or a draft. Be sure to include your contacts for feedback. Indicate your wishes on the operation of the sliding system, if any.

We will make a calculation and send you a commercial proposal and video of the system that is more suitable in terms of technical parameters and your wishes, as well as write down the sequence of further actions to start the project in work.