.

Video reviews on lower support systems Vizyon SCS-L, X

Embedded thumbnail for Vizyon SCS-L bottom-supported

Intuitive, easy to operate system, easy to install. It can be installed at any stage or during the construction phase or when the terrace is ready. There are no strict requirements for openings, due to the fact that the system is bottom-supported. Maximum height 3000 mm, maximum sash width 1000 mm.

 

Other sliding frameless systems for terraces PHOTO here

Other sliding frameless systems for terraces VIDEO here

Embedded thumbnail for Vizyon SCS-X frameless sliding bottom support system

The combination of glass and wood looks very nice. Sliding frameless system Vizyon SCS-X, glass corner. The turnkey lock which is located inside the panel profile works both from the middle of the opening and from the outside. Other structures are fixed inside with a special latch lock. The system is equipped with side plugs made of metal (not plastic), this is important, because a screw passes through this side plug to adjust the roller, over time in more budgetary systems this screw pushes the plate plugs, it becomes necessary to carry out frequent service.

Embedded thumbnail for SCS-L Vizyon Bottom Support Sliding System
Embedded thumbnail for Vizyon SCS-L frameless sliding lower support system sliding terrace with a long span

You can install the Vizyon SCS lower support system behind the columns, how it works, see video 2020

Pages

Subscribe to Video reviews on lower support systems Vizyon SCS-L, X
^ To top
Asking
price
Calculate the cost by size

Our customers are very busy people. We save your time, therefore we simplified the work scheme and made it as convenient as possible for you.

If you want to know the approximate cost for the size of your terrace, balcony, then immediately go to the Price list , the price is for the finished construction with the installation VBS VBS-X, L SCS-X SCS-L KCS-L KCS  how can the systems work in systems video review

If you are already ready to place an order, then you no longer need to wait for the measurer, while adjusting your plans, it is enough:

Send photos of the openings you want to glaze (terrace, barbecue area, interior partition, etc.) and approximate dimensions (error up to 1 cm is permissible) to us by email biuro@vizyon.company or by WhatsApp number +48573 580 838. Alternatively, you can send a freehand drawing or a draft. Be sure to include your contacts for feedback. Indicate your wishes on the operation of the sliding system, if any.

We will make a calculation and send you a commercial proposal and video of the system that is more suitable in terms of technical parameters and your wishes, as well as write down the sequence of further actions to start the project in work.