Video Catalog

Embedded thumbnail for Vizyon SCS-L bottom-supported

Intuitive, easy to operate system, easy to install. It can be installed at any stage or during the construction phase or when the terrace is ready. There are no strict requirements for openings, due to the fact that the system is bottom-supported. Maximum height 3000 mm, maximum sash width 1000 mm.


Other sliding frameless systems for terraces PHOTO here

Other sliding frameless systems for terraces VIDEO here

Embedded thumbnail for Vizyon KCS top-hung parking and sliding door

A very important function, often structures are installed already on the finished terrace, so the door should be placed where it is convenient. For the most part, sliding frameless systems cannot fulfill such a need due to technical features. But the Vizyon KCS overhead suspension system with parking can include such an option, if necessary. How it works, see the video.



Embedded thumbnail for Vizyon KCS-L corner accordion, how it looks

One of the difficult technical tasks is to count two sliding systems into one corner. The angle should be clearly 90 degrees. The profile should also be trimmed in relation to each other so that there are no errors. When the sashes converge, all errors and errors will be visible, if they were made. But, such an option is still possible, the Vizyon KCS-L corner accordion in the video is a confirmation of this.

Embedded thumbnail for Bioclimatic control panel

How the bioclimatic pergola is controlled, see the video


^ To top
Calculate the cost by size

Our customers are very busy people. We save your time, therefore we simplified the work scheme and made it as convenient as possible for you.

If you want to know the approximate cost for the size of your terrace, balcony, then immediately go to the Price list , the price is for the finished construction with the installation VBS VBS-X, L SCS-X SCS-L KCS-L KCS  how can the systems work in systems video review

If you are already ready to place an order, then you no longer need to wait for the measurer, while adjusting your plans, it is enough:

Send photos of the openings you want to glaze (terrace, barbecue area, interior partition, etc.) and approximate dimensions (error up to 1 cm is permissible) to us by email biuro@vizyon.company or by WhatsApp number +48573 580 838. Alternatively, you can send a freehand drawing or a draft. Be sure to include your contacts for feedback. Indicate your wishes on the operation of the sliding system, if any.

We will make a calculation and send you a commercial proposal and video of the system that is more suitable in terms of technical parameters and your wishes, as well as write down the sequence of further actions to start the project in work.